-
台州市聪慧精细化工有限公司
CH7200A机印白胶浆
CH7200B机印透明浆
一、适用
◇ 本产品适用于棉布、涤棉布莫代尔丝光棉等针织或梭织面料。适合椭圆机、八爪鱼圆盘机、平网机、圆网机上操作。二、性能及指标
◇ 固含：55%±1
◇ 外 观：乳白色糊状物
◇ 主成分：环保丙烯酸脂共聚物
◇ 离子类型：阴离子三、特 性
◇ 遮盖力好，光泽饱满、弹力好，水洗牢度好，得色率好（透明），摩擦牢度超好，干湿擦达到4级以上（透明）手感软，干爽性好，不塞网，不粘手，手感光滑，。适合于椭圆机、平网机、圆网机、八爪鱼机印刷；连续印刷4-6小时不塞版。四、操作及参考
调浅色 调深色
白胶浆 80-90% 白胶浆 25-15%
透明浆 20-10% 透明浆 75-85%
◇印花工艺：印花 → 烘干、干燥 → 热处理（130-150℃，3-5分钟）或 热压（130-150℃,3-5秒）。
五、注意事项
◇ 自然干燥时间与气温和空气湿度有关在印花之前先要做小样实验，确定以后方可进行批量生产。
◇ 未确定情况使用或操作不当引起的质量问题本公司概不负责。◇ 如加固化剂的浆料建议8小时内使用完毕。
六、保存期温室贮存一年，室温0-40℃，避免暴晒 或 冷冻。
CH7200A machine printing white base
CH7200B machine printing clear base
一、Substrates
◇ This product is suitable for cotton,modal,mercerized cotton woven or knitwear fabrics.It also suitable for operating on elliptical machine,octopus disc machine,flat screen machine and cylinder machine.
二、Performance and Index
◇ Solid content:55%±1
◇Appearance :milky white paste
◇Main component:environmental protection acrylate copolymer
◇Ionic: anion
三、Features
◇ Good covering power,full gloss,high tensile strength,good wash fastness,good color yield rate(clear),good fastness of friction,the wet and dry rub reaches above 4 degree(clear)soft hand feel,dry,not plug mesh,non-sticky,smooth hand feel.It is suitable for elliptical machine,flat screen machine,cylinder machine and octopus machine,continuous printing for 4-6hours will not plug mesh.
四．Operation and Reference
Light color Dark
White glue 80-90percent white glue 25-15percent
Transparent glue 20-10percent transparent glue 75-85%
Printing process： printing-dry-heat treasure(130-150℃，3-5minutes)or hot pressure(130-150℃，3-5seconds).
五．Notes
The time of air dry is related to temperature and air moisture.It should have sample test before printing and then in a batch production after determined.
Our company is not responsible for quality problem due to misuse under uncertain condition.
If the paste with curing agent,should be used up within 8 hours.
六、The shelf life is one year at room temperature, the room temperature is 0-40℃，avoid exposure or freeze.