<-----  向左滑动显示详细信息

其他详细信息

品牌	聪慧	组成	丙烯酸酯聚合物、水性聚氨酯
粘度	120000~140000mpa.s	PH值	7.5~8.5
外观	白色膏状	固含量	白：55-65% 透：45-55%

一、适用

本产品适用于平网机、椭圆机、圆网机的胶浆印花，具有操作性、过网性好等特点，可连续印刷4小时以上，可用于棉、麻、T/C、莱卡等布料胶浆印花。其特点是使用方便，手感柔软，印花操作性佳，优异的坚牢度，印花面可耐-25℃冷冻24小时不开裂。产品符合环保标准，可用于童装印花。

二、性能及指标

外观：白色膏状

组成：丙烯酸酯聚合物、水性聚氨酯、助剂

P H ：7.5～8.5

粘度：12-14万mpa.s

固含量：透45-55%，白55-65%

三、特性

使用方便，手感柔软，印花操作性佳，优异的坚牢度，印花面可耐-25℃冷冻24小时不开裂。产品符合环保标准，可用于童装印花。干湿擦达到3.5-4级。

1026W防冻莱卡浆白：牢度好，印刷性能佳，持久耐水洗，印花表面可耐-25℃冷冻24小时不开裂。环保，适用于圆网、平网机、椭圆机

1026C防冻莱卡浆透：牢度好，印刷性能佳，持久耐水洗，印花表面可耐-25℃冷冻24小时不开裂。环保，适用于圆网、平网机、椭圆机，干擦达到4级，湿擦2级

四、参考配方

	白色印花 加色印花
Z-1026W	99-100% 20%
Z-1026C	----- 80%
色种	----- 0-5%
固化剂	0-1％ 0-1％
合计	100% 100%

五、操作流程

100-120目网板水性尖刀---（印花2刀---闪干）X3次---焙烘（130～150℃×1～2分钟）

六、注意事项

1、添加固化剂可有效提高印花面的牢固度，以满足特殊面料或高要求的印花，添加了固化剂的印花色浆必须在24小时内用完；对于高弹拉架布，罗纹布的印花可用透明浆Z-1026C打底印花1-2次，以提高印花的弹性。

2、印花后必须将印花面进行充分的热处理（焙烘），才能完全显示其优异的印花效果。如自然晾干，必须在72小时后方可测试牢度。

3、该产品的贮存期为12个月，请保存在低温干燥处，使用后必须将盖子盖紧，以免表面结皮，影响再次使用。

4、因化工产品本身存在多变性，无论本公司提供的小样还是大货，工厂均需按指定的工艺条件认真打样，待各项牢度检测合格后方可投入大生产。任何未经测试而造成的损失，本公司概不承担。

Other detailed information

Brand	Cong hui	Composition	Acrylate polymers、waterborne Pu
Viscosity	120000~140000mpa.s	PH value	7.5~8.5
Appearance	White paste	Solid content	White ：55-65% clear ：45-55%

一、Substrates

This product is suitable for flat screen machine、elliptical machine、“octopus”machine,it has features are good ability of operation and mesh through ability.It can be printed more than 4 hours continually. It also suitable for cotton、linen、T/C and Lycra. The features of this pastes are easy to use、soft hand fee、good ability of printing operation and excellent fastness. The appearance of printing can resistant to -25℃，freeze 24 hours will not crack.This product conforms to environmental standard, useful to children’s apparel .

二、Performance and Indicators

Appearance: white paste

Composition: white paste

PH : 7.5~8.5

Viscosity:12-140000mpa.s

Solid content: clear 45-55%, white 55-65%

三、Features

This pastes are easy to use、soft hand fee、good ability of printing operation and excellent fastness. The appearance of printing can resistant to -25℃，freeze 24 hours will not crack.This product conforms to environmental standard, useful to children’s apparel .The dry and wet reaches 3.5-4 degrees.

1026W anti-freeze Lycra paste white:good fastness,excellent printing ability,durable wash performance,The appearance of printing can resistant to -25℃，freeze 24 hours will not crack.Environmental product,meanwhile,

product is suitable for flat screen machine、elliptical machine、“octopus”machine

四、Reference formula

	White printingAdditive color printing
Z-1026W	99-100% 20%
Z-1026C	----- 80%
Pigment	----- 0-5%
Curing agent	0-1％ 0-1％
Total	100% 100%

五、Operation process

Using 100-120 mesh screen to scrape,twice for one time,total three times——Drying (130-150℃ for 1-2 minutes.）

六、Notes

1、Adding curing agent can improve fastness efficiently to meet customers needs of printing on special fabric or high requirements of printing,the paste which has already added curing agent must be used up within 24 hours; As for high stretch Indiana cloth and rib fabric could use z-1026c clear to scrape as render for 1-2 times to improve the elasticity of fabric.

2、After printing,the surface of fabric must make a hot treatment(drying),so that it can show the excellent printing effect of paste. If natural drying,making a test of fastness must after 72 hours.

3、The storage of this product is 12 months,should be stored in a cool and dry place,by the way,after use should be tighten the lid securely to avoid skim foaming, affect reuse.

4、Due to the chemical product exists variability,whatever samples or finished products provided by our company, the factory should accord identified conditions to make a test, after the results will be ok ,then you can in mass production. Otherwise we are not responsible for any losses.