-
特性：
耐高温，特粘，浓度大，泡水不烂台，不易反白，与市场体系台胶兼容性强。
使用方法：
若：太粘，可以加3-5%的水进行稀释后再使用。
①先台板洗干净、烘干透 → 再刮刀在台板上均匀上胶 → 再烘干（一定要干透），方可铺上布印刷、印花。
②多次使用后可用热毛巾擦一下，把垃圾清除，可再使用。
③多次使用后，可以用 水和 “水沙皮、水沙纸” 对台板胶打磨，将表面不粘层祛除，可再使用。
④清洗台板：只要用热水加少量洗衣粉清洗或 用酒精擦洗 或 用铲刀铲除。
友情提示：据多年市场经验，极少数印花厂家操作不当出现台板胶反粘在布片上，其主要原因是①台板表面浆体铺的太厚②天气闷热引起③台板胶没有完全干透。 解决办法：用烘车将水份烘干，即可。
Other detailed information
Brand
Conghui
Model
Table paste
Customization
Yes/no
Viscosity
/
PH Value
/
Material
/
Appearance
/
Specification
No limitation
Temperature resistance
/
Granularity
/
Origin
Zhejiang
Package
/
Features:
Resistance to high temperature,very stick,large concentration,using water to dip will not damage table,not easy to highlight,good combination with table glue in the market
Usage :
1、If too sticky, could add 3-5% water to dilute and to use .
At first clean and dry the table→using scraper to glue evenly and mildly on table→drying,and then it is well to spread a cloth on table to print.
It could use warm towel to wipe after using many times,clear out the rubbish and then to use.
It could use water and “water sand paper”to polish table paste,to eliminate the non-sticky surface and then to use.
④Cleaning the table:only need to use hot water and little washing powder to wash or alcoholic to scrub or shovel to uproot.
Extra credit:according to many years marketing experience,small amount of printer due to incorrect operation appear the consequence that table paste after tack on the fabric, the main reasons that are spread thick paste on the table due to hot weather the table paste does not dry completely. Solution:using drying car to dry.