-
本系列产品适用于化纤，尼龙布。调水浆需加10%—20%水洗牢度特强。
[性质]
外观:乳白色液体
主成分:特殊树脂
离子性:阴离子
含固量: 50%
1)易调色,色泽鲜艳饱满。
2)牢度特好,耐水性特强,手感较柔软,流动性好,覆盖力强,花形轮廓清晰。
3)耐黄变(高温下不易泛黄变色)。平整度好。
4）环保指数达国际环保织物要求。
[应用]滚筒、圆网、平网、手工印花和喷花多种工艺。
[操作工艺]
浆料+色浆+固色剂,根据实际情况调整(Mesh网布80-120目)印花→干燥
有条件：烘干、热处理(130-150℃,3-5分钟)效果更好。
[注意事项]每批次货/每次使用前,必须认真试验,确认后方可使用。
1)选择合适的固色剂可以提高印花面的色牢度与摩擦牢度(注意固色剂的时效性) ,避免使用阳离子色浆和助剂。
2)干透后再进行热处理,可以增加牢度。24-48小时后,方可测试牢度。
Other detailed information
Brand
Conghui
Model
320nylon solid slurry
Viscosity
/
PH value
/
Odor
/
Strength
T
Fineness
/um
Appearance
Usage
Color strength
100%
Fluidity
/mm
Shelf life
12months
Single net weight
50KG
Resin type
/
Ionic
anion
Appearance color
This product applies to chemical fiber, nylon. Water slurry should add 10%-20% and the ability of wash is strong.
【Features】
Appearance :ivory liquid
Main component: special resin
Ionic: anion
Solid content: 50%
1)Easy to adjust color, bright and full color
2)Great fastness, resistant to wash, soft hand feel, good fluidity, high covering power and the contour is clear.
3)Resistance to yellowing(it is not easy to turn yellow ),good flatness.
4)The indicator of environment reach the requirement of international environmental textiles.
【Application】
Roller ，rotary screen， flat screen and manual printing and spray.
【Operation technology】
Slurry+paste+curing agent,according to real situation(mesh 80-120) to printing→dry
Conditions: baking and heat pressure(130-150℃，3-5minitues)better effect.
【Notes】Each batch of goods/each time of using,must have a careful test and using in a certain way.
1)Choosing suitable curing agent can improve the ability of fastness and friction for the surface of printing(pay attention to the time of curing agent), avoid to use cationic paste and auxiliaries.
2)Making a heat pressure after dry completely,it can increase fastness.And you can make a test for fastness after 24-48hours.