-
一．适用：
本产品用于棉布，涤棉布。起发泡效果。
二、外观组成及说明：
本品系高分子水性树脂、进口发泡粉及助剂所组成的浅黄色细腻均匀的膏状物，属于水性感热型发泡凸浆
三、特性
柔软有肉感，牢度好，表面光滑，发泡程度高，操作性好、发泡后立体均匀。
四、操作流程、使用方法：
印花-----自然干----过烘炉130度-150度 烘3分钟----完全干透后40度恒温水洗2小时。
1、深色布发泡印花配比：40%发泡浆40%白胶浆20%透明浆
2、浅色布发泡印花配比:40%发泡浆20%白胶浆40%透明浆
Other detailed information
Brand
Conghui
Model
838
Viscosity
/
PH value
/
Odor
/
Strength
/
Fineness
/
Appearance
/
Usage
/
Color strength
100%
Fluidity
/
Shelf life
/
Single net weight
20KG
Resin type
/
一．Substrates
This product is suitable for cotton, polyester cloth,foaming behavior.
二．Appearance composition and specification
This product is a slight yellow fine paste which composite with macromolecule water-based resin、imported foam powder and auxiliaries, belongs to water-based sensible heat foam paste.
三．Characters
Soft and meaty,good fastness,stain finish,high degree of foaming,good performance of operation,three-dimensional after foaming.
四．Operation process、usage
Printing ---natural drying ---- through oven at 130-150℃，stoving 3minutes---after drying completely wash 2hours at a constant temperature.
1.The ratio of dark foam printing:40%foaming paste40%white paste20%clear paste
2.The ratio of slight foam printing:40%foaming paste20%white paste 40%clear paste