-
适用：
纺织品棉布、化纤布、牛仔布、皮革等面料。
二、性能及指标
30分钟表干温度：48℃
2分钟固化温度：≥125℃
高温流动温度：≥168℃
柔软度：44mpa.s
外观：无流动性微黄色
粘度：15000-20000
三、特性：
优秀的透明度、光泽度、立体效果强、附着力高、表面干爽、强度。
四、注意事项：
1、使用前请仔细阅读更详细的相关说明书，并且进行详细的测试和试生产。
2、如对我们的产品有任何质量上的疑问，我们按照三包的原则，在不影响第二次销售（桶盖完好，外观无破损）的情况下免费更换或退货，但是不给予使用后造成的工程损失做任何赔偿。
3、若不慎入眼，请立即用干燥棉布轻轻擦去后用大量清水洗后就医。
4、使用后将容器密封保存在阴凉处，建议32℃下保存。
5、请使用者参考MSDS的基础上对油墨作负责处理。
五、产品运输：
1、请勿挤压和高空坠落
2、本品不属于危险品和国家禁止的违禁品。
Other detailed information
Brand
Conghui
Model
Low temperature thermosetting ink
Viscosity
15000-20000CPS
PH Value
/
Fineness
/
Appearance
/
Color strength
100%
Fluidity
/
Shelf life
/
Minimum quantity
No limitation
Single net weight
5、25、50KG
Substrates
/
Drying
/
Fixing speed
/
Safety standard
/
Mesh screen
/
一．Substrates
Cotton textiles、chemical fabric, denim and leather.
二．Performance and indicators
30minutes surface dry temperature:48℃
2minutes curing temperature:≥125℃
High-temperature fluidity temperature:≥168℃
Softness ：44mpa.s
Appearance :non -flowable yellowish
Viscosity :15000-20000
三．Features
Excellent transparency、glossiness、strong dimensional effect、high adhesion、clean surface .
四．Notes
1.please read specification carefully before using and make a detailed test and trial production.
2.If you are dubious of our product’s quality problem, we will according to three guarantees principle,exchange or return products in the condition that not affect
Second selling, but we do not give any financial losses.
3.If enters into eyes by accident, please erase quickly and then use water to clear and next go to hospital.
4.After using, please store it in airtight shadowy condition, advising to store under 32℃.
5.Please at the base of MSDS,should be responsible for plastisol ink.
五．Product transportation
1.please do not squash and fall.
2.This product do not belongs to dangerous product and prohibited product.