-
[说 明]：
“CH-666尼龙催化剂”采用:德国技术+德国进口原料+德国工艺,精心制作而成。
[亮 点]：
固色效果更好,手感较柔软,弹力影响少，高附着力，耐磨性强。
1.解决尼龙固色剂由日本、美国、荷兰、西班牙等国家垄断现象。
2.解决尼龙固色剂:易硬化, 易凝固(不易储藏)等不稳定现象。
3.解决尼龙固色剂:快干,易堵网版现象。
[包 装]：
每桶净重为1KG、20 KG
[性 质]：
外 观: 淡黄色透明液体
主成分: 特殊德国进口异氰酸酯等交联剂原料合成离子性: 非离子
[保 质 期]：
室温5-35℃, 避免暴晒 或 受冻, 一般可贮存1年。(环境保持阴凉、干燥、通风)
[特 征]：
对化纤、尼龙、莱卡、牛仔石磨、皮革等都有良好的适应性。
[应 用]：
滚筒、圆网、平网、手工印花和喷花多种工艺,投放比例2-5% (根据实际情况酌情舔加)。
[用途]：
1)添加到涂料印花胶浆中,可以很好的提高印花的耐附着力和摩擦性。
2)添加到尼龙浆、牛仔石磨浆里能显著提高浆料的耐摩擦性和耐附着力，但不影响浆料的弹性和手感。
3）添加到水性丙稀酸树脂与水性聚氨酯树脂乳液中,热处理后可以显著提高粘合强度。
4)添加到棉及涤棉处理浆中一起使用,可以提高耐久拒水抗油强度。
5)添加到丁苯类乳胶水溶性粘合剂中使用,热处理后能显著提高粘合强度。
6)添加到任何水性带烘焙工艺的浆料中一起使用,可以明显改善涂层的耐擦洗、耐摩擦、耐化学腐蚀与耐候性。
[注意事项]：
每批次货/每次使用前,必须认真试验,确认后方可使用。
1)助剂从包装桶中倒出后,不得灌回去。避免细菌进入引起变质。
2) CH-666尼龙催化剂可以有效提高印花面的色牢度与摩擦牢度(注意催化剂的时效性),避免与阳离子助剂混用。
3)干透后再进行烘焙热处理,可以增加牢度。12-24小时后,方可测试牢度。
Other detailed information
Brand
Conghui
Model
CH-666
Viscosity
/
PH value
/
CAS
/
Appearance
/
Usage
/
Origin
Zhejiang
Package
1KG 20KG
Shelf life
One year
Solid content
/
Appearance color
/
Effective material content
/
[specification]:
“CH-666 Nylon catalyst “adopts Germany technology+Germany imported raw material+Germany technique.
[bright spot]:
Good fixation effect, soft hand feel, less influence of stretch, high adhesion and strong resistance to wear.
1.To solve the monopoly phenomenon of nylon fixing agent caused by Japan, America, Netherlands ans Spain.
2.To solve the unstable phenomenon of Nylon fixing agent that are easy to hardening, easy to solidificate(uneasy to store).
3.To solve the phenomenon of Nylon fixing agent that are drying faster and easy to mesh plug.
[package] :
Net weight 1KG, 20 KG per drum.
[characters]:
Appearance :slight yellow transparent liquid
Main component: composite by cross linker like special Germany imported isocyanate Ionic:
[shelf life]:
At room temperature 5-35℃，avoid to sun exposure or freeze, could be stored for one year as usual(the environment should be cool, well-ventilated and dry)
[features]:
It has good adaptability for chemical fiber、Nylon、Lycra、denim and leather.
[application]:
Cylinder、rotary screen、flat screen、hand-printing and spray printing,the ratio is 2-5%(according to actual situation to add )
[usage ]:
1)adding into printing paste,could improve the ability of adhesion and resistance to friction.
2)Adding into nylon paste and denim graphite paste could apparently improve the paste’s ability of resistance to friction and adhesion,but it could not affect its strength and hand feel.
3)adding into water-based acrylic resin and water-based polyurethane resin,could improve the viscosity after heat pressure.
4)Adding into cotton and polyester cotton dealing paste,could improve the ability of washing.
5)adding into ibuprofen adhesive paste ,could improve viscosity after heat pressure.
6)adding into any water-based with baking technique paste,could improve wash、friction、chemical etching and weather resistance.
[notes]:
Before using every batch or each time, must make a test and use under certain condition.
1).once the auxiliary pour out from package ,it could not be put back again.avoid to let bacteria into and cause metamorphic.
2)CH-666nylon catalyst could improve color fastness and friction fastness effectively(pay attention to the timeliness of catalyst.)avoid to use composite with cationic auxiliary.
3)After drying make a bake heat pressure to increase fastness.Making fastness test after 12-24hours.